LRTM Operator (Fiberglass Molding Technician) in Chocowinity, North Carolina at Boaters World Manufacturing Group

Build Your Career in Boat Manufacturing!

Boater's World Manufacturing Group is seeking a dependable, detail-oriented, and mechanically inclined LRTM Operator (Fiberglass Molding Technician) to join our growing boat manufacturing operation in Chocowinity, North Carolina.

This position is responsible for producing high-quality fiberglass components using the Light Resin Transfer Molding (LRTM) process. These components may include boat hatches, lids, consoles, panels, and other molded fiberglass parts used throughout the boat manufacturing process.

The LRTM Operator will prepare molds, position fiberglass and reinforcement materials, operate resin infusion and vacuum equipment, monitor the molding process, and inspect completed parts to ensure they meet established quality standards.

We're looking for someone who enjoys hands-on work, pays close attention to detail, and takes pride in producing quality products. Previous experience with fiberglass, composites, resin infusion, or manufacturing is preferred, but we are also interested in dependable candidates who are mechanically inclined and willing to learn.

Essential Duties & Responsibilities

LRTM Molding & Production

• Operate Light Resin Transfer Molding (LRTM) equipment to manufacture fiberglass boat components.
• Prepare molds for production by cleaning surfaces, inspecting mold conditions, and applying appropriate release agents.
• Position fiberglass reinforcement materials, core materials, and other required components within molds according to production specifications.
• Properly close, secure, and seal molds before beginning the resin transfer process.
• Connect and monitor resin supply lines, vacuum lines, and other required molding equipment.
• Monitor resin flow, vacuum pressure, and infusion processes to ensure proper material distribution.
• Follow established resin mixing, catalyst handling, and processing procedures.
• Monitor curing times and conditions according to established production requirements.
• Safely open molds and remove completed fiberglass components after curing.
• Perform routine production tasks while maintaining quality and efficiency.
• Follow production schedules and communicate any delays or equipment concerns to supervisors.

Fiberglass Finishing & Quality Control

• Inspect molded fiberglass components for defects, imperfections, and overall quality.
• Identify issues such as voids, air pockets, incomplete resin saturation, surface imperfections, or improper curing.
• Trim excess fiberglass, flash, and other materials from completed parts as required.
• Perform basic finishing and cleanup work to prepare components for the next stage of production.
• Verify that completed parts meet established specifications and quality standards.
• Report damaged molds, defective components, or production concerns to supervisors.
• Maintain consistent workmanship and attention to detail throughout the molding process.
• Assist with rework or corrective actions when necessary.

Equipment, Mold Care & Maintenance

• Clean and maintain molds, tools, hoses, and equipment used in the LRTM process.
• Inspect molds and equipment for wear, damage, leaks, or other operating concerns.
• Assist with routine equipment cleaning and preventive maintenance activities.
• Properly store fiberglass materials, resins, catalysts, and production supplies.
• Monitor material usage and notify supervisors when supplies are running low.
• Maintain an organized and efficient workstation.
• Report equipment malfunctions or process abnormalities promptly.
• Follow established procedures to prevent mold damage and unnecessary material waste.

Safety, Teamwork & Production Support

• Follow all company safety procedures when working with fiberglass, resins, catalysts, chemicals, and manufacturing equipment.
• Wear required personal protective equipment (PPE) while performing assigned duties.
• Follow established chemical handling, ventilation, and material storage procedures.
• Maintain a clean, safe, and organized work environment.
• Work closely with production supervisors, quality personnel, and other manufacturing employees.
• Assist with material preparation, production setup, and other fiberglass manufacturing activities as needed.
• Follow work instructions, production specifications, and established manufacturing procedures.
• Identify opportunities to improve production efficiency, material usage, and overall product quality.
• Perform additional manufacturing responsibilities as assigned.

• High school diploma or GED preferred.
• Ability to work in a hands-on manufacturing or production environment.
• Basic mechanical aptitude and ability to operate manufacturing tools and equipment.
• Ability to follow detailed instructions, production procedures, and quality standards.
• Strong attention to detail and commitment to producing quality work.
• Ability to accurately measure materials and follow production specifications.
• Dependable attendance, punctuality, and a strong work ethic.
• Ability to work independently and as part of a production team.
• Willingness to learn fiberglass molding techniques, resin handling, and LRTM equipment operation.
• Ability to follow workplace safety procedures and properly use required PPE.
• Ability to work full-time on-site in Chocowinity, North Carolina.

Preferred Qualifications

• Previous experience in fiberglass manufacturing, boatbuilding, or composite production.
• Experience operating Light Resin Transfer Molding (LRTM) equipment.
• Familiarity with resin infusion, vacuum-assisted molding, or closed-mold manufacturing processes.
• Experience preparing molds, applying release agents, and positioning fiberglass reinforcement materials.
• Knowledge of fiberglass resins, catalysts, core materials, and composite manufacturing techniques.
• Experience inspecting and finishing molded fiberglass components.
• Familiarity with marine manufacturing, boat assembly, or recreational vehicle production.
• Experience working in a production environment with established quality and output expectations.

Knowledge, Skills & Abilities

• Fiberglass and composite manufacturing.
• Light Resin Transfer Molding (LRTM).
• Mold preparation and maintenance.
• Resin infusion and vacuum-assisted molding.
• Fiberglass reinforcement and core material placement.
• Resin and catalyst handling.
• Basic manufacturing equipment operation.
• Fiberglass trimming and finishing.
• Quality inspection and defect identification.
• Production procedures and work instructions.
• Attention to detail and quality workmanship.
• Safe chemical handling and PPE usage.
• Teamwork and communication.
• Time management and dependability.

What We're Looking For

We're looking for someone who enjoys working with their hands and understands the importance of following a consistent manufacturing process.

The ideal candidate is someone who:

• Takes pride in producing high-quality fiberglass components.
• Is comfortable working with tools, molds, and manufacturing equipment.
• Pays close attention to details and follows production instructions carefully.
• Can recognize quality concerns and communicate them to supervisors.
• Maintains a clean, organized, and safe workspace.
• Works well with others and contributes to meeting daily production goals.
• Is dependable, motivated, and interested in developing their manufacturing skills.
• Has an interest in fiberglass, composites, or the boatbuilding industry.

Work Environment & Physical Requirements

• Work is performed in an active boat manufacturing environment.
• Regular exposure to fiberglass materials, resins, catalysts, chemical odors, dust, noise, and varying temperatures.
• Ability to stand and walk for extended periods throughout the workday.
• Ability to bend, reach, kneel, and perform repetitive manufacturing tasks.
• Ability to lift and carry materials, tools, and components as required by assigned duties.
• Ability to safely operate manufacturing tools and equipment.
• Must wear required PPE, which may include safety glasses, gloves, protective clothing, and respiratory protection when applicable.
• Ability to follow established chemical handling and workplace safety procedures.

Why Join Boater's World Manufacturing Group?

Boater's World Manufacturing Group is growing its marine manufacturing operations in Eastern North Carolina, supporting the production of NauticStar boats.

As an LRTM Operator, you'll play an important role in manufacturing the fiberglass components that go into our boats.

Whether you already have fiberglass experience or are looking to develop new skills in composite manufacturing, this is an opportunity to become part of a growing production team and build a long-term career in the marine industry.

Benefits

• Medical, dental, and vision insurance.
• Life insurance.
• 401(k) with company match.
• Paid time off.
• Paid holidays.
• Employee discounts.
• Training and professional development opportunities.
• Career growth and advancement opportunities.

Apply Today

If you're dependable, detail-oriented, and interested in working with fiberglass and composite materials in a boat manufacturing environment, we'd like to hear from you!

Apply today to join Boater's World Manufacturing Group as our next LRTM Operator (Fiberglass Molding Technician) in Chocowinity, North Carolina!

Equal Employment Opportunity

Boater's World Manufacturing Group is an equal opportunity employer. Employment decisions are based on qualifications, merit, and business needs without regard to any characteristic protected by applicable law.