Extrusion Tooling Specialist in Kearneysville, West Virginia at Tema North America, LLC
Job Description
The Extrusion Tooling Specialist is responsible for the condition, preparation, preventive care, and traceability of precision production tooling used in TeMa North America plastics manufacturing, including extrusion-related tooling. The Specialist ensures tooling is clean, inspected, accurately assembled, properly stored, and ready when needed by Production. Working with Maintenance, Production, Technical Operations, and Quality, the Specialist helps reduce preventable tooling damage, changeover delays, defects, and downtime. This is a technical individual contributor role, not a general machine-maintenance or production supervisory position.
DUTIES & RESPONSIBILITIES:Tooling Care & Readiness
- Assemble, disassemble, clean, inspect, prepare, and preserve extrusion dies, calibrators, mandrels, rollers, dimple tooling, and other assigned production tooling in accordance with approved instructions.
- Check tooling for wear, damage, cleanliness, surface condition, fit, and dimensional accuracy using the applicable drawings, specifications, and precision instruments.
- Handle, install, remove, clean, store, and protect damage-sensitive aluminum rollers. Reinforce consistent standards of handling with employees who use or move them.
- Identify tooling that is not ready for production, separating it and clearly labeling it as appropriate. Communicate the required corrective action before use.
- Verify tooling assembly, fastening, and mechanical retention within the specialist’s assigned scope. Escalate unresolved concerns before startup authorization.
Production/Changeover Support
- Prepare the correct tooling for scheduled production and communicate readiness, shortages, and repair needs to Production and Maintenance.
- Perform the tooling-specific portions of die, roller, dimple, and other tooling changes in coordination with Maintenance and production. Assist with setup and startup checks within assigned authority.
- Troubleshoot tooling-related defects and operating problems with Production, Quality, and Maintenance. Determine whether tooling condition, fit, cleanliness, or installation may be a contributing factor.
- Support controlled removal, inspection, and return-to-service of tooling. Maintenance retains responsibility for machine-system repairs, while authorized Production personnel control line operation and startup release.
Preventive Maintenance & Repair
- Complete planned inspection, cleaning, servicing, and preventive maintenance activities for assigned tooling. Help establish practical inspection and cleaning intervals using tool condition and usage history.
- Perform basic tooling adjustments, fitting, polishing, grinding, and minor machining when within demonstrated skill, approved methods, and equipment capability.
- Identify, document, and coordinate larger tooling repairs or changes requiring additional technical approval or outside suppliers. Do not independently change tool design or critical dimensions without authorization.
- Perform specialized cleaning of cylinders, holes/passages, and L2000 spinnerets only after task-specific training and authorization, using approved safety and work instructions.
Tooling Control & Documentation
- Maintain accurate tooling register and roller map with identification, location, condition, availability, maintenance status, and repair history where applicable.
- Record significant inspections, maintenance, repairs, modifications, use or incident history, and current tooling status so the next user can understand the tool’s readiness.
- Maintain orderly, protected, identified tooling storage and communicate missing or damaged tooling promptly.
- Monitor critical tooling, dimples, extrusion filters, components, and consumables. Identify replenishment needs and coordinate requests through approved purchasing and inventory processes.
Training & Standard Work
- Draft and improve practical work instructions for critical tooling cleaning, handling, preparation, installation, removal, inspection, and preservation. Obtain the required technical and safety approvals through TeMa’s normal process.
- Demonstrate correct tooling practices and coach operators, shift teams, and Maintenance personnel, particularly in the protection of aluminum rollers and other precision surfaces.
- Support training records and knowledge transfer as requested. Formal employee qualification or certification remains with the designated management or training authority.
Continuous Improvement
- Identify recurring tooling damage, premature wear, cleaning problems, changeover delays, and tooling-related defects. Recommend specific, practical corrective actions.
- Work with relevant teams to test approved improvements and update records or instructions after changes are implemented.
- Performs other related duties as assigned by management.
- This position does not have any direct reports.
- High School Diploma or equivalent.
- Minimum of two (2) years of relevant hands-on experience in tooling, precision mechanical assembly, machining, tool and die, industrial maintenance, or comparable shop/manufacturing work.
- Ability to interpret basic technical drawings, dimensions, tolerances, and tooling instructions.
- Must be able to use calipers, micrometers, dial indicators, and common hand/shop tools accurately and safely.
- Mechanical troubleshooting ability, strong attention to detail, and disciplined handling of precision components.
- Must be able to document work, communicate effectively across shifts and departments, and work independently within defined procedures.
- Must be willing and able to travel internationally for initial technical training in Italy for a minimum of two (2) weeks, if training cannot be completed in the U.S.
- Other skills required:
- Precision measurement and careful verification of fits, dimensions and surfaces
- Mechanical assembly, tooling inspection, and basic shop equipment use.
- Troubleshooting that separates tooling problems from machine, material, and process problems.
- Planning and organization to make tooling ready without sacrificing inspection quality.
- Clear communication, reliability, ownership of tool condition, and willingness to teach and learn.
- Must be fluent in both metric and imperial units of measure.
- Plastics extrusion or other continuous-process manufacturing experience.
- Vocational education, relevant apprenticeship, or technical training in machining, tooling, or mechanical maintenance.
- Practical experience with polishing, grinding, fitting, minor machining, and tooling preventive maintenance.
- Experience maintaining a tooling inventory, roller mapping, tooling history, or standard work instructions.
- CNC, welding, fabrication, and extrusion-material knowledge, when relevant to assigned equipment.
- Basic computer skills and experience using Microsoft 365 products.
The physical demands described are representative of those that must be met by an employee to successfully perform the duties and responsibilities of this job. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the duties and responsibilities.
This position will be located in a production shop floor environment on a schedule working Monday through Friday from 8:00 AM to 5:00 PM. Shift schedules are subject to change; overtime and on-call time may also be required based on business conditions. While performing the duties of this job, the noise level in the work environment is moderate with occasional loud noise. Frequently required to talk, hear, walk, sit, and stand. Occasionally required to climb, balance, bend, stoop, kneel or crawl. Continually works near moving mechanical parts and may occasionally be exposed to fumes, airborne particles, heat, or toxic chemicals. Must be able to lift and/or move up to 50 pounds.
HEALTH & SAFETY REQUIREMENTS:- Perform job functions in a safe manner.
- Wear all Personal Protective Equipment (PPE) required by Company policy for the job being performed.
- Know and follow established job-specific and facility wide safety and health procedures and rules.
- Actively participate in safety and health training and demonstrate competency based on training received.
- Brings safety and health issues, unsafe acts, and safety suggestions to management’s attention or correct those you can upon observation.
- Follow lock-out/tag-out (LOTO), electrical safety, and machine guarding safety protocols.
- Ensure all equipment is safe to operate before returning it to production.
- Participate in safety audits, hazard assessments, and continuous improvement initiatives.
- Use approved practices for sharp or heavy tooling, lifting, hot tooling, chemicals, grinding, machining, and authorized thermal-cleaning tasks. Stop and escalate work when conditions are unsafe.
- Maintain a clean, organized work area and protect tools from contamination, mishandling, and damage.
This job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. They may change, or new ones may be assigned at any time with or without notice.
BENEFITS:- Multiple benefit plans to choose from based on you and/or your family’s needs, beginning the 1st of the month following date of hire.
- 401(k) eligibility after 90 days.
- Vacation and Holiday pay
- Training opportunities
- And much more!
TeMa North America is an Equal Opportunity Employer.
Scan to Apply
Just scan this QR code to apply from your phone.
- Fast
- Easy
- Apply on the go