Engineer I-III (SCADA Engineer) in Albuquerque, New Mexico at PNM Resources

POSTING DEADLINE

This position is posted until filled.

DEPARTMENT

Department: DOC Engineering

PREFERENCES

• Configure and maintain SCADA devices, points, alarms, and operator displays.
• Validate point mapping, communications, and data quality between field equipment and operational systems.
• Develop and execute test procedures, document results, investigate defects, and support point-to-point testing, failover verification, commissioning, and cutover activities.
• Coordinate control testing with authorized operations and field personnel using approved procedures.
• Troubleshoot telemetry, control, alarm, communications, and application issues in collaboration with the responsible technical teams.
• Support controlled configuration changes, software updates, recovery testing, and technical documentation.

JOB DESCRIPTION

Engineer I

Salary: DOE

Personnel in this job title may be covered by NERC CIP cyber security standards. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a Personnel Risk Assessment, which includes identity verification and a criminal background check. Prior to being granted unescorted access to cyber secure areas, the candidate must attend cyber security training. Annual cyber security training is also required.

Given the financial nature of this position, this position may be required to obtain a credit check depending on location. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a credit background check.

SUMMARY:

Under direct supervision, performs assignments designed to develop engineering work knowledge and abilities through the application of standard techniques, practices and procedures.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Provides entry-level engineering support for projects that are small and somewhat repetitive in nature

Conducts small or repetitive studies or participates in larger studies where project performance, cost, and scheduling are the key factors of evaluation

Provides basic engineering support to operational areas

Communicates engineering ideas, recommendations and evaluations

Represents the Company in technical matters that are fundamental in nature

Provides entry-level technical support to and interacts with other associates

Uses the Company and industry standards to ensure safety and consistency of engineering results

Provides occasional technical direction and/or activity supervision to contractors and lower-level Company personnel

COMPETENCIES:

Knowledge and ability to apply the appropriate basic and well-established principles, practices and regulations in the incumbents respective discipline

Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, etc.)

Demonstrated good leadership skills, self-motivation, and good interpersonal skills

Ability to translate electrical theory and physics to utility application for improving system reliability

Demonstrated confidence working in and around high voltage (up to 345kV) electrical facilities. and equipment

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

Bachelors Degree in engineering from a college or university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET) and one to three years related experience.

CERTIFICATES, LICENSES, REGISTRATIONS:

Must possess current, legally valid driver¿s license and meet the Company¿s driving record requirements.

COMMUNICATION SKILLS:
Ability to read and interpret documents

Ability to write routine reports and correspondence, write speeches, and presentations

Ability to speak effectively before groups of customers, employees, and managers of the organization

COMPUTER SKILLS:

In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs, such as Autocad

Working knowledge of operating systems, word processing, database, and spreadsheet software

ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.

PHYSICAL DEMANDS:

This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights.

Protective equipment required: Hard-hat, safety glasses and hearing protection.

WORK ENVIRONMENT:

Time will be divided between office and field, with a majority of time in the office.

Work will be around high voltage electricity, computers, office equipment, and construction equipment.

JOB DESCRIPTION

Engineer III

Salary: DOE

Personnel in this job title may be covered by NERC CIP cyber security standards. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a Personnel Risk Assessment, which includes identity verification and a criminal background check. Prior to being granted unescorted access to cyber secure areas, the candidate must attend cyber security training. Annual cyber security training is also required.

Given the financial nature of this position, this position may be required to obtain a credit check depending on location. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a credit background check.

SUMMARY:

Manages moderately scoped engineering projects and detailed phases of larger initiatives to support the delivery of safe, reliable electric power. Applies broad engineering expertise to resolve complex problems, oversee technical studies, and support operational areas through improved standards and processes. Influences engineering practices and provides guidance to contractors and colleagues.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Handles all engineering aspects of projects with moderate scope or detailed components of major projects, ensuring timely and cost-effective delivery

Leads and conducts performance, cost, and scheduling studies using conventional and innovative engineering techniques

Supports operational teams by applying standard and non-standard engineering practices to improve system reliability and efficiency

Communicates engineering ideas, recommendations, and evaluations effectively to diverse internal audiences in meetings and presentations

Represents the company's interests in complex engineering matters, providing technical direction and oversight to contractors and company personnel

Applies knowledge of national, state, and local electrical codes and standards (such as IEEE, ANSI, NEC, NESC) to ensure compliance and safety

Translates electrical theory and physics into practical utility applications to enhance system performance and reliability

Forecasts project budgets and contribute to resource planning and allocation

Coaches and mentors junior engineers, fostering their professional development and ensuring quality standards are met

Maintains a safe work environment by adhering to company protocols when working around high voltage electrical facilities

COMPETENCIES:

Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations

Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, ASME, NACE, etc.)

Ability to translate electrical theory and physics to utility application for improving system reliability

Ability to make informed repair decisions following company protocols

Comfortable working in and around high voltage (up to 345kV) electrical facilities and equipment

Ability to forecast budgets

Demonstrated leadership skills, self-motivation, and interpersonal skills

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

Bachelor¿s Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus four or more years of engineering experience or three or more with a Fundamentals of Engineering certificate or three or more with a Master¿s Degree in Engineering.

CERTIFICATES, LICENSES, AND REGISTRATIONS

Fundamentals of Engineering certificate is preferred.

Must possess current, legally valid driver¿s license and meet the Company¿s driving record requirements.

COMMUNICATION SKILLS:

Ability to read and interpret documents

Ability to write routine reports and correspondence, write speeches, and presentations

Ability to speak effectively before groups of customers, employees, and managers of the organization

COMPUTER SKILLS:

In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs

In depth knowledge of word processing, database, and spreadsheet software

ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.

Physical Demands
Frequent sitting, standing, walking, and exposure to outdoor elements. Ability to lift up to 50 pounds. Activities may include crouching, bending, climbing, and working at various heights. Use of protective equipment such as hard hats, safety glasses, and hearing protection required.

Work Environment

Work environment includes office settings and field locations around high voltage electrical facilities and construction equipment.

JOB DESCRIPTION

Engineer II

Salary: DOE

Personnel in this job title may be covered by NERC CIP cyber security standards. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a Personnel Risk Assessment, which includes identity verification and a criminal background check. Prior to being granted unescorted access to cyber secure areas, the candidate must attend cyber security training. Annual cyber security training is also required.

Given the financial nature of this position, this position may be required to obtain a credit check depending on location. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a credit background check.

SUMMARY:

Applies engineering expertise to support projects of intermediate size and complexity. Under general supervision, evaluates engineering options, applies standard techniques, and contributes to improving transmission and distribution system reliability. Supports the development of technical skills through responsibility for routine and moderately challenging problems, effective communication across teams, and participation in the development of company and industry standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Independently applies standard engineering techniques and procedures to intermediate projects related to transmission and distribution systems

Conducts studies evaluating performance, cost, and scheduling of engineering alternatives to support decision-making

Interprets and applies national, state, and local electrical codes and standards such as IEEE, ANSI, NEC, NESC, ACI, and AISC

Prepares clear and concise engineering reports, presentations, and technical documentation for both engineering and non-engineering audiences

Provides technical support and guidance to other associates, contractors, and company personnel as required

Represents the company in intermediate engineering matters and contribute to the formulation of company and industry standards

Participates in activities that improve system reliability and operational efficiency, including working safely in and around high voltage electrical facilities

Assists in coordinating with construction, operations, and maintenance teams to ensure engineering solutions meet practical requirements and safety standards

Maintains compliance with NERC CIP cyber security standards where applicable, including passing required risk assessments and training

COMPETENCIES:

Knowledge of and ability to apply standard engineering principles, practices and regulations, and economic and decision analysis principles to area problems including, but not limited to, generation, transmission, distribution, fuels, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations.

Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, etc.).

Demonstrated good leadership skills, self-motivation, and good interpersonal skills.

Ability to translate electrical theory and physics to utility application for improving system reliability.

Comfortable working in and around high voltage (up to 345kV) electrical facilities and equipment.

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

Bachelor¿s Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus 2 or more years of engineering experience or 1 or more with a Fundamentals of Engineering certificate or 1 or more years plus a Master¿s Degree in Engineering.

CERTIFICATES, LICENSES, AND REGISTRATIONS

Fundamentals of Engineering certificate preferred.

Must possess current, legally valid driver¿s license and meet the Company¿s driving record requirements.

COMMUNICATION SKILLS:

Ability to read and interpret documents.

Ability to write routine reports and correspondence, write speeches, and presentations.

Ability to speak effectively before groups of customers, employees, and managers of the organization.

COMPUTER SKILLS:

In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs, Autocad, Word, Access, Excel, Windows, etc.

ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.

Physical Demands
Frequent sitting, standing, walking, and exposure to outside elements. Ability to lift up to 50 pounds. Activities include crouching, bending, climbing, and working at various heights. Use of protective equipment such as hard-hat, safety glasses, and hearing protection is required. Time will be divided between office and field

Work Environment

Work will be around high voltage electricity, computers, office equipment, and construction equipment.

SAFETY AND ADA STATEMENT

Safety Statement:
Safety is a core value at (TXNM Energy/PNM/TNMP) and our vision, "everyone goes home safe", reflects our commitment to promoting an environment conducive to learning, improving and building safety practices. Our safety value is built upon the belief that every employee deserves to work in an environment free from harm.

Americans with Disabilities Act (ADA) Statement:
If you require assistance with the job application process due to a disability, please contact HR ADA Analyst, at 505-241-4627.